MTEC Corporate Training

Dates:  TBD 
Schedule:  TBD
Cost:  $625
Format:  Traditional
Location:  Thompson M-TEC Main Campus 

Description:
5S & Visual Management is an 8-hour activity-based course to improve workplace organization and translate processes and production statuses into easy-to-understand visual overviews. With one glance, the whole team can locate needed items and get an understanding of a factory's performance.  This course teaches a set of techniques that makes 5S and operation standards visible so that people can follow them more easily.  These techniques expose waste so that it can be prevented and eliminated.  5S & visual management is also an essential part of a Lean management system, which uses displays, metrics and controls to help establish and maintain continuous flow.  Visual tools reinforce standards, and help people detect abnormalities at a glance.

Course Objectives:

As a result of this course, participants should be able to:

•  Explain why 5S & Visual Management is an integral part of Lean transformation
•  Apply the five principles of 5S (Sort, Straighten, Shine, Standardize and Sustain)
•  Apply the four principles of Visual Management (Defines the standard condition, Highlights problems, creates alignment, Drives action & learning)
•  Utilize a variety of visual tools such as red tagging, activity boards, A3 storyboards, poka-yoke, one-point lessons, standard work, Kanban, value stream mapping, etc..
•  Gain knowledge on how to apply visual tools to add structure and stability to 5S and operations, reducing variation and increasing efficiency.
•  Compare & contrast visual display, visual metrics and visual control

Enroll Now

Dates:  TBD
Schedule:  TBD
Cost:  $425
Format:  Traditional
Location:  Thompson M-TEC Main Campus

This 8-hour A3 Problem Solving course is an activity-based, pencil and paper tool designed to solve specific problems. It defines the current condition and looks at the root cause of the issue. The A3 also guides the user to define clear steps to implement changes and builds accountability.  Participants will experience a simple and effective way to understand the way work happens now and how it can be redesigned effectively.

ENROLL NOW

Dates:  10/14/2024 to 10/18/2024
Or -
Dates:  4/14/2025 to 4/18/2025
Schedule:  Monday - Friday; 7:30 AM - 4:00 PM
Cost:  $1,495
Format: Traditional
Location:  Thompson M-TEC Main Campus 

Description:
This Forty (40) hour course is designed to familiarize participants with the Rockwell RSLogix PLC programming. This course will provide learners with the fundamentals needed to create, transfer, test and verify working RSLogix projects.

The uses of Ladder logic are explained. The concept of ladder logic using tags and datatypes instead of data tables will be applied. Participants will go online with controllers and edit ladder routines online and offline.

Enroll Now

Dates:  10/21/2024 to 10/25/2024
or - 4/28/2025 to 5/2/2025
Schedule:  Monday through Friday; 7:30 AM to 4:00 PM
Cost:  $1,495
Format: Traditional
Location:  Thompson M-TEC Main Campus 

Description:
This forty (40) hour course is designed to allow the user to program, test and verify a range of PLC programs. Programming concepts, tips and rules will be applied. This course will provide learners with a working knowledge of working online and offline using RSLogix projects.

Ladder logic fundamentals are used in multiple examples. Participants will be able to monitor, edit, and create Programs and Routines to construct, monitor or modify projects. The concept of ladder logic using tags and datatypes instead of data tables will be applied. Participants will go online with controllers and edit ladder routines online and offline.

Enroll Now

Dates: 11/4/2024 to 11/8/2024
or - 5/12/2025 to 5/16/2025
Schedule:  Monday through Friday; 7:30 AM to 4:00 PM
Cost:  $1,495
Location:   Thompson M-TEC Main Campus

Description:
Applied Ethernet is an entry level ethernet class. It introduces the learner to ethernet communication theory as well as applied techniques to program, troubleshoot, replace and configure ethernet devices that are used throughout the plants.

Enroll Online!

Dates: 1/21/2025 to 1/30/2025
Schedule:  Tuesday and Thursday; 8:00 AM to 4:00 PM
Cost:  $995
Format:  Traditional
Location:  Thompson M-TEC Main Campus

Description:
This thirty-two (32) hour course is designed to provide an understanding and use of Autodesk’s AutoCAD program and to guide a participant in becoming a proficient AutoCAD 2D detailer. This course will take those with little or no previous experience with AutoCAD through the basics of computer-aided design including file generation and sharing, the user interface, tools, and commands. Participants will be instructed on the procedures and use of the Cartesian coordinate system, and basic geometry will be created using standard object “Draw” and “Modify” commands. Participants will learn the standards for dimensioning, tolerances, and scale to create detail drawings.

ENROLL NOW

Dates:  10/14/2024 or 3/4/2025
Schedule:  Monday or Tuesday; 7:30 AM to 4:00 PM
Cost:  $475
Location:  Thompson M-TEC Main Campus

Description:
This 8-hour Blueprint Reading course will provide the students with the basic skills needed for understanding the language of technical drawings or blueprints.

Enroll Now!

Dates:  TBD
Schedule:  TBD
Cost:  $1,125
Format: Traditional
Location:  Thompson M-TEC Main Campus 

Description:
This 5-day course is for individuals preparing for the American Society for Quality (ASQ) Certified Six Sigma Greenbelt exam (CSSGB), and is based on the CSSGB Body of Knowledge.  It is intended to teach a structured approach to improve the quality of products & services, outcomes and the bottom line by identifying and removing the causes of defects (errors), minimizing variability and improving workflow in business processes. Participants can expect to be fully engaged while learning and applying principles, tools and techniques for completing breakthrough improvement projects.   Participants are also expected to complete a work-related project as part of this course.

Course Objectives:

As a result of this course participants should be able to:

•  Define the DMAIC process and explain how it is used reduce variation and improve quality
•  Define a Six Sigma project opportunity.
•  Measure a process utilizing Six Sigma techniques.
•  Analyze measurement results utilizing basic statistical concepts.
•  Apply Six Sigma techniques in the course of performance improvement work.
•  Transition successful project outcomes to managers that will take on responsibility for monitoring and controlling process performance

Enroll Now

Dates: 10/8/2024 and 10/9/2024
Schedule:  Tuesday and Wednesday; 8:00 AM - 12:00 AM
Cost:  $450
Format: Traditional
Location:  Thompson M-TEC Main Campus 

Time:  Two 4-hour sessions

Audience: 

• Leaders who want to upskill their management tools to meet the demands of today’s workforce
• Influencers with indirect responsibility to lead talent and achieve results
• Learning and Development Managers looking to build a coaching culture

Description:
We have experienced radical change in the workplace, and it appears that change may be the new normal.  We are moving to a more flexible workplace as a permanent solution to environmental and market demands.  In this course, managers will learn how to:

• Create a Culture of Engagement, even in a Virtual Workplace
• Pivot from offering feedback-on-the-fly to a five-minute coaching session…because that’s what employees want
• Communicate to heighten accountability and minimize defensiveness
• Lead development discussions, from On-boarding, One-on-Ones through Internal Promotions

Learn proven strategies to build a culture of engagement that will add value to your busy day without spending big chunks of time.

Enroll Now!

Dates:  11/5/2024
or - 4/2/2025
Schedule:  Tuesday or Wednesday; 7:30 AM to 4:00 PM
Cost:  $425
Format:  Traditional
Location:  Thompson M-TEC Main Campus

Description:
This one-day course on Critical thinking skills and behaviors is essential to effective problem solving. This course exposes participants to frameworks, methods, tools and  techniques that better equip them to identify problems and challenges and make effective decisions to address them. Developing the ability to rationally and objectively recognize, evaluate and act on  both problems and opportunities is key to creating value through strategic and   innovative thinking.

Enroll Online!

Dates:  11/4/2024 to 11/8/2024
Schedule:  Monday - Friday; 7:30 AM - 11:30 AM
Or
Dates:  3/31/2025 to 4/4/2025
Schedule:  Monday - Friday; 7:30 AM - 4:30 PM
Cost:  $1,495
Format: Traditional
Location:  Thompson M-TEC Main Campus 

Description:
This forty (40)-hour training course covers the basics of AC (Alternating Current) and DC (Direct Current) theory and fundamentals. The participant will first gain an understanding of the concepts of electrical schematics, components, voltage, current, and resistance. These fundamentals will be applied through Ohm’s Law to basic circuit design and analysis. Power, magnetism, and DC generation will then be introduced to complete the theories of DC applications.

ENROLL NOW

Dates:  10/7/2024 to 10/11/2024
or - 3/3/2025 to 3/7/2025
Schedule:  Monday - Friday; 7:30 AM to 4:00 PM
Cost:  $1,495
Format: Traditional
Location:  Thompson M-TEC Main Campus 

Description:
This forty-hour (40 hr.) training is designed to provide the basic skills in AC/DC motors and motor control. It also provides an understanding of the operation of AC and DC motors and motor control circuits. Training topics include AC/DC motor operations, control circuit components, motor control wiring, connections, ladder diagrams, and interpretation of electronic motor control schematics.

Enroll Now

Dates:  10/21/2024 to 10/24/2024
or - 3/17/2025 to 3/20/2025
Schedule:  Monday through Thursday; 7:30 AM to 4:00 PM
Cost:  $1,295
Format:  Traditional
Location:   Thompson M-TEC Main Campus

Description:
In this 4-day, 32-hour class is designed around an individual that has some knowledge of multimeter usage and has some identification with basic electrical components. Schematic symbols will be introduced as they appear on wiring diagrams. Pictures as well as illustrations of typical control devices will be introduced along with associated equipment & hardware. The student will build a very basic circuit on a simulated panel board using a schematic. The student will troubleshoot any errors made in the build process, and any problems introduced by the instructor. Control panel standards along with wiring techniques will be implemented in classroom assignments. NEMA, CSA & IEC standards will be introduced along with applicable National Electrical Codes. Relay logic control circuits will also be constructed from diagrams of actual circuits found in today’s machine control. Some of these circuits include start stop, limits, control, safety and holding.

ENROLL NOW

Dates: 9/23/2024 to 9/25/2024
or - 2/17/2025 to 2/19/2025
Schedule:  Monday through Wednesday
Cost:  $995
Format:  Traditional
Location:   Thompson M-TEC Main Campus

Description:
This 3-day (24-hour) training course covers the basics of safely understanding electricity. The student will first gain an understanding of the safety and concepts of reading electrical schematics, electrical components, voltage, current and resistance. These fundamentals will be applied to an understanding of how to safely operate a digital multi-meter, power supplies and scope meter while understanding NFP70E codes.

Enroll Online

Dates: 11/18/2024 to 11/20/2024
or - 4/14/2025 to 4/16/2025
Schedule:  Monday through Wednesday; 7:30 AM to 4:00 PM
Cost:  $995
Format:  Traditional
Location:   Thompson M-TEC Main Campus

Description:
This class introduces the student to the newest and the most important electronic automation (Must Know Technology) of today, and the future. The student will be introduced to the many types and boundary ranges of sensors. Adjusting and alignment of sensors where needed will be included in the coursework. Sinking and0 sourcing explanations along with NPN and PNP types of sensors are included in the class. Interfacing sensors with PLC inputs and troubleshooting field wiring will also be covered. The coursework is 50% hands on where the student will investigate the logic that is outputted from different types of sensors. Imbedded in all labs will be terms, schematic symbols, and methods of bench testing a wide range of sensors. Videos will be included in the curriculum to enhance the learning experience of the participant.

ENROLL NOW

Dates:  TBD
Schedule:  TBD
Cost:  $780
Format:  Traditional
Location:  Thompson M-TEC Main Campus

Description:
EveryDay Leadership is an interactive course where leaders will learn current concepts and best practices. Robust tools are simple to learn and can be easily adapted to many applications. When tools are easy to remember, they are more likely to be used.

Everything we do is designed to make the learning stick. At the end of each class there will be an applied assignment to practice at work. Participants will practice skills in the class and give each other feedback.
EveryDay Leadership uses models and tools from proven resources. These resources include:

• DiSC (Wiley)
• Five Behaviors of Functioning Teams (Lencioni)
• Q12 (Gallup)
• Situational Leadership (Blanchard)
• Active Listening (Blanchard)

Enroll Online!

Dates:  11/11/2024 to 11/15/2024
or - 4/21/2025 to 4/25/2025
Schedule:  Monday - Friday; 7:30 AM to 4:00 PM
Cost:  $1,650
Format:  Traditional
Location:  Thompson M-TEC Main Campus

Description: This forty (40)-hour course is designed to provide the basic skills needed to operate and program the FANUC or ABB Robots. Course topics include robotic safety, controls, operations, and part programming.

Enroll Now

Dates:  11/18/2024 to 11/22/2024
or - 4/28/2025 to 5/2/2025
Schedule:  Monday through Friday; 7:30 AM to 4:00 PM
Cost:  $1,650
Format:  Traditional
Location: Thompson M-TEC Main Campus

Course Description:
This forty-hour (40 Hr.) course is designed to provide advanced skills for operating and programming Fanuc Robots.

Enroll Now

Dates:  12/9/2024 to 12/13/2024
or - 5/12/2025 to 5/16/2025
Schedule:  Monday - Friday; 7:30 am - 4:00 pm
Cost:  $1,695
Format:  Traditional
Location:  Thompson M-TEC Main Campus

Description
This 40-hour course is designed to provide the basic skills needed to troubleshoot electrical repair and maintenance procedures of robotic electrical system. Course topics include robot electrical component identification and function of robot electrical controllers.

Enroll Now

Dates:  12/2/2024 to 12/6/2024
or - 5/5/2025 - 5/9/2025
Schedule:  Monday - Friday; 7:30 AM - 4:00 PM
Cost:  $1,695
Format:  Traditional
Location:  Thompson M-TEC Main Campus

Description
This 40-hour class is designed to train all students on robot mechanical equipment, hand tools, and rigging in safe manner.  All with the proper applications of lock out procedures for a cell in the plant.  This course will increase the tradesmen’s versatility in the plant or field.

Enroll Now

Dates:  12/2/2024 to 12/3/2024
or - 6/3/2025 to 6/4/2025
Schedule:  Monday & Tuesday or Tuesday & Wednesday; 7:30 AM to 4:00 PM
Cost:  $675
Format: Traditional
Location:  Thompson M-TEC Main Campus

Lean Applied is a two-day activity-based course to learn and apply a systematic methodology to identify and eliminate waste within a process to improve the flow or velocity of the outputs.  Participants can expect to be fully engaged while learning and applying a breakthrough strategy based on the Theory of Constraints to improve a company’s overall throughout.  Through activities, case studies and simulations participants will experience how flow is achieved through balance of work.

Enroll Online!

Dates:  10/17/24 to 10/18/24
or - 3/5/2025 to 3/6/2025
Schedule:  Thursday & Friday or Wednesday & Thursday; 7:30 AM - 4:00 PM
Cost:  $675
Format:  Traditional
Location:  Thompson M-TEC Main Campus 

Description:
This sixteen-hour course will provide students with a fundamental understanding of Geometric Dimensioning and Tolerancing (GD&T).

Enroll Online

Dates: TBD
Schedule:  TBD
Cost:  $1,495
Format:  Traditional
Location:   Thompson M-TEC Main Campus

Description:
This forty (40) hour course is designed to provide the skills in HMI fundamentals.  The course provides an understanding of HMI functions hardware and applications. Course topics include PLC to HMI instructions, hardware, HMI graphics, and creating troubleshooting messages displayed on HMI.

Enroll Now

Dates:  5/19/2025 to 5/23/2025
Schedule:  Monday - Friday; 7:30 AM - 4:00 PM
Cost:  $1,495
Format:  Traditional
Location:  Thompson M-TEC Main Campus

Description:
This forty (40)-hour course is designed to provide the basic skills in Air/Fluid Power.  The course provides an understanding of air/fluid power symbols, basic components of fluid power systems including basic laws and formulas for fluid power calculations. Course topics include pumps, control valves, actuators and maintenance procedures of air/fluid power systems.

Enroll Now

Dates:  TBD
Schedule:  TBD
Cost:  $115
Format:  Traditional
Location:  Thompson M-TEC Main Campus

The new Michigan public health code rule (Rule 338.7001(c)) goes into effect as of June 1, 2022, requiring all licensed and registered healthcare professionals to train on Implicit Bias as a condition for initial licensure/registration and renewals. The training must include interaction between an instructor and other participants which makes this in-seat course ideal for the requirements of the rule!

Implicit (subconscious) bias refers to the attitudes or stereotypes that affect our understanding, actions and decisions in an unconscious manner. These biases, which encompass both favorable and unfavorable assessments, are activated involuntarily and without an individual’s awareness or intentional control. Interactive topics will include:

• Define the concept of implicit bias
• Reflect on personal and professional biases
• Understand the impact implicit biases present in healthcare
• Define strategies to mitigate the negative impact of implicit bias

Qualifies for up to 4-hours of State Continuing Education Clock Hours (SCECHs).

Approved for Social Worker CEUs.

This training will provide a certificate from Thompson M-TEC to validate your proof of compliance to the new rule

Dates: TBD
Schedule:  TBD
Cost:  $780
Format: Traditional
Location:  Thompson M-TEC Main Campus 

Description
Leadership Skills for Managers is a 4-topic development program targeted at new to middle managers.  The program is delivered four 4-hour sessions to an intact, in-person management team, or it can be customized for general audiences. 

Each workshop agenda follows an 80/20 Rule: at least 80% of the time the participants are actively involved in an activity such as a meaningful discussion, small group exercise, or self-reflection assignment. 

This approach ensures that each workshop is wildly successful because participants can immediately apply what they’ve learned to individual and collective work.

All workshop sessions include a participant’s workbook/resource guide

Enroll Online!

Dates:  TBD
Schedule:  TBD
Cost:  $640
Format: Traditional
Location:  Thompson M-TEC Main Campus 

Description:
 Lean Applied is a two-day activity-based course to learn and apply a systematic methodology to identify and eliminate waste within a process to improve the flow or velocity of the outputs.  Participants can expect to be fully engaged while learning and applying a breakthrough strategy based on the Theory of Constraints to improve a company’s overall throughout.  Through activities, case studies and simulations participants will experience how flow is achieved through balance of work.

Enroll Now

Dates:  TBD
Schedule:  TBD
Cost:  $850
Format: Traditional
Location:  Thompson M-TEC Main Campus 

Lean Bronze Certification is a 24-hour course to teach the Lean Bronze Body of Knowledge from the Association for Manufacturing Excellence (AME), the Society of Manufacturing Engineers (SME), Shingo Prize for Operational Excellence (Shingo Prize) and the American Society for Quality (ASQ). The standard assesses a person’s lean knowledge (exam), as well as the individual’s ability to apply that knowledge (lean project portfolio). This Bronze Level Exam Preparation Course (with ability to sit for Bronze exam as an option), is designed to prepare students to take and pass the multiple choice, open book exam that is the first step in pursuing certification. Bronze Certification is focused on tactical application of lean. Tactical lean is the deployment and application of lean principles, concepts and methods locally, within a work cell, work group or value stream.

Dates:  TBD
Schedule:  TBD
Cost:  $625
Format: Traditional
Location:  Thompson M-TEC Main Campus 

Description:
Learning to See – Eliminating Waste in the Workplace is a 16-hour workshop intended to provide a structured approach to identifying and eliminating waste.  Participants will learn DOWNTIME (defects, overproduction, waiting, not using our talent, inventory, motion and extra processing) through a series of activities, case studies and simulations.   They can expect to be fully engaged while being given real life scenarios where they must identify the specific types of waste present and how solving the problem or implementing an opportunity eliminates waste. 

Course Objectives:

As a result of this workshop, participants should be able to:

•  Compare and contrast work, incidental work and waste
•  Provide numerous examples of each of the eight types of waste typically found in the workplace
•  Explain how overburden on people and equipment is reduced by eliminating waste and reducing variation
•  Describe A3 problem solving and explain how it is used to eliminate waste
•  Define “2 Second Lean” and describe how it is used to get everyone involved in eliminating waste on an ongoing basis

Enroll Now

Dates: 3/11/24 to 3/12/24
Schedule:  Monday & Tuesday; 7:30 AM to 4:00 PM
Cost:  $475
Format:  Traditional
Location:   Thompson M-TEC Main Campus

Description:
This eight (8) hour course provides the participant with the principles and skills of reading and interpreting blueprints.

Enroll Online!

Dates:  TBD
Schedule:  TBD
Cost:  $935
Format: Traditional
Location:  Thompson M-TEC Main Campus 

Module 1 - Shop Math

This course is designed to provide an understanding of the basic mathematics that is used on the shop floor.

Module 2 - Print Reading

This course provides the participant with the principles and skills of reading and interpreting blueprints.

Module 3 - Metrology

This course provides the participant with the basic skills in understanding the sciences of measurements that are used in Manufacturing

Module 4 - GD&T

This course will provide students with fundamentals of the Geometric Dimensioning and Tolerancing (GD&T) system

Dates:  TBD
Schedule:  TBD
Cost:  $375
Format: Traditional
Location:  Thompson M-TEC Main Campus 

Description:
 Every measurement is subject to some uncertainty. A measurement result is only complete if it is accompanied by a statement of the uncertainty in the measurement.  Measurement uncertainties can come from the measuring instrument, the item being measured, the environment, the operator, and other sources. Such uncertainties can be estimated using statistical analysis of a set of measurements, and other kinds of information about the measurement process.  This one-day activity-based workshop will teach how to determine and reduce overall measurement uncertainty.  Participants can expect to be fully engaged while learning a process approach to identify the amount of variation associated with a measurement system, and discover the sources of variation so improvements can be made to improve the overall integrity of the data.  Simulations, case studies and a series of activities will be used to learn and apply tools and techniques associated with MSA.  

Enroll Now

Dates:  TBD
Schedule:  TBD
Cost:  $350
Format:  Traditional
Location:   Thompson M-TEC Main Campus

Description:
This eight (8) hour course provides the participant with the basic skills in understanding the sciences of measurements that are used in Manufacturing

Enroll Now

Dates:  11/6/2024 to 11/8/2024
Or
 Dates:  2/10/2025 to 2/12/2025
Schedule:  Monday through Wednesday; 7:30 AM to 4:00 PM
Cost:  $725
Format:  Traditional
Location:  Thompson M-TEC Main Campus

This Twenty-four (24)-hour training course will familiarize the student with the basic principles of GMAW (Gas Metal Arc Welding), using MIG welder. The course will provide basic skills using MIG welder on mild steel and positions. This course incorporates both lecture and hands-on exercises. This course length is designed to familiarize existing welders to MIG Welding and improve their welding skills.

ENROLL NOW!

Dates:  TBD
Schedule:  TBD
Cost:  $899 
Format:  Traditional
Location:  Thompson M-TEC Main Campus

Description:
This forty (40)-hour training course will familiarize the student with the basic principles of GMAW (Gas Metal Arc Welding), using MIG welder. The course will provide basic skills using MIG welder on mild steel and positions.  This course incorporates both lecture and hands-on exercises. This course length is designed to familiarize existing welders to MIG Welding and improve their welding skills.

Dates:  11/18/2024 to 11/22/2024
Or -
Dates:  6/2/2025 to 6/6/2025
Schedule:  Monday - Friday; 7:30 AM - 4:00 AM
Cost:  $1,495
Format: Traditional
Location:  Thompson M-TEC Main Campus 

Description:
This forty (40) hour course is designed to provide the skills necessary for maintenance personnel to navigate through Allen-Bradley Studio 5000 GuardLogix and LogixDesigner Software with shop floor maintenance in mind. This course gives the learner the necessary skills to go online with the PLC to search, cross reference, toggle, force, branch, upload, download, troubleshoot remote racks, wiring, switches, limit switches, photo eyes, safety gates, and E stops.

Enroll Online!

Dates:  12/2/2024 to 12/6/2024
Or -
Dates:  6/16/2025 to 6/20/2025
Schedule:  Monday - Friday; 7:30 AM - 4:00 AM
Cost:  $1,495
Format: Traditional
Location:  Thompson M-TEC Main Campus 

Description:
This forty (40) hour course is designed to provide the skills necessary to navigate through Allen-Bradley’s RS Linx, Studio 5000 GuardLogix and LogixDesigner Software. This course is designed to give the learner with limited or basic PLC understanding, the necessary skills to go online with the PLC to search, cross reference, toggle, force, branch, upload, download, and make backup copies of the logic. The learner will also be able to perform basic ladder logic programming. Hirschmann switch basics will be covered, as well as ethernet communications to safety nodes and remote racks. Ethernet basics to include command prompt pinging, unlimited pinging, and troubleshooting switches, cables, and nodes will be practiced.

Enroll Online!

Dates:  11/6/2024 to 11/7/2024
or - 1/14/2025 to 1/15/2025
Schedule: Wednesday & Thursday, or Tuesday & Wednesday; 7:30 AM - 4:00 PM
Cost:  $625
Format:  Traditional
Location:  Thompson M-TEC Main Campus

Description:
This 2-day workshop teaches the mechanics of effective project management, how to get people onboard, better utilize their skills and achieve successful results.  Participants can expect to be fully engaged while learning and applying a step by step approach to help reduce the risk and uncertainty associated with project completion. 

Enroll Now

Dates:  TBD
Schedule:  TBD
Cost:  $248 (Provides a $50 discount on the SOLIDWORKS Essentials tuition)
Format:  Traditional
Location:  Thompson M-TEC Main Campus

Prerequisite:  Basic computer knowledge

Description:
This course is recommended for students to evaluate knowledge before taking a SOLIDWORKS Essentials class, or to gain a cursory knowledge of SOLIDWORKS. In this class you will be generating basic details, making edits, learning how to do a design review, and inspecting dimensions. This class will give you an insight of what you can expect if you decide to take the next step, and enroll in our SOLIDWORKS Essential class, which will provide a more detailed, working knowledge of SOLIDWORKS, and the ability to start designing professionally.

Enroll Now!

Dates:  TBD
Schedule:  TBD
Cost:  $959 
Format:  Traditional/Lab
Location:  Thompson M-TEC Main Campus

SOLIDWORKS Outline & Requirements

Description:
In this 48-hour course, students will learn the fundamental skills and concepts central to the successful use of SOLIDWORKS Essentials. Concepts include how to create parts, assemblies, and drawings along with general engineering theories. Please see SOLIDWORKS Outline for description and requirements.

Enroll Now!

Dates:  TBD
Schedule:  TBD
Cost:  $635
Format:  Traditional
Location:   Thompson M-TEC Main Campus

Prerequisites:  Foundational knowledge of SOLIDWORKS modeling creation, assembly creation and drawing creation, along with a basic understanding of sheet metal and weldments fabrication.

Description:
In this course, Students will understand the concepts of SOLIDWORKS sheet metal and weldments. Learning to create sheet metal parts such as brackets, square to rounds, guarding, etc. with flat patterns. Learn weldments, leverage 3D sketching for structural profiles. Learn to generate drawings and other manufacturing documentation, along with many other topics in this SOLIDWORKS course.

Enroll Now!

Dates:  TBD
Schedule:  TBD
Cost:  $749 
Format:  Traditional/Lab
Location:  Thompson M-TEC Main Campus

Description:
This SOLIDWORKS CAM Introduction course, designed to teach students the essentials of SOLIDWORKS CAM will highlight the basic features and identify parts of the program. Students will learn stock Set-up and Automatic Feature Recognition (AFR), Manual 2.5 Axis Features, Generate and Edit Path, custom Strategies, posting, and technology database. Course participants will learn tasks to interface and set-up SOLIDWORKS CAM. They will also learn basic features and custom strategies.

Dates:  TBD
Schedule:  TBD
Cost:  $450
Format: Traditional
Location:  Thompson M-TEC Main Campus 

Description:
Statistical Process Control w/MSA is a 16-hour activity-based workshop to teach fundamentals of process control and how to apply it to product, process and measurement systems.  Participants will use a series of activities to learn and apply tools and techniques associated with process control. 

Course Objectives:

As a result of this workshop participants should be able to:

• Define terms associated with SPC and MSA
• Describe attribute and variable data and give examples of each
• Compare & contrast control versus capable
• Monitor and control processes using both attribute and variable control charts
• Describe basic capability concepts and the importance of capability when using control charts
• Describe and apply techniques used to reduce measurement system variation (gage R&R, attribute agreement analysis)

Dates:  12/9/2024 to 12/11/2024
or - 3/24/2025 through 3/26/2025
Schedule:  Monday through Wednesday; 7:30 AM to 4:00 PM
Cost:  $725
Format:  Traditional
Location:  Thompson M-TEC Main Campus

Description:
The GTAW welding course will familiarize the student with the basic principles of inert gas welding using TIG welder. The course will provide basic skills using TIG welder on mild steel and variety of positions. This twenty-four (24) hour course incorporates lecture and hands-on exercises.

Enroll Now!

Dates:  11/21/2024 to 11/22/2024
or - 2/25/2025 to 2/26/2025
Schedule:  Thursday & Friday or Tuesday & Wednesday; 7:30 AM - 4:00 PM
Cost:  $625
Format:  Traditional
Location:  Thompson M-TEC Main Campus

Description:
Value Stream Mapping is an activity based 2-day workshop intended to learn and apply value stream mapping in a manufacturing or administrative setting.  Value Stream Mapping is a process that captures both the flow of a product/service and the flow of information in a value stream.  It is used as a planning technique as a means to link all Lean initiatives together into a meaningful and manageable plan for improvement. 

Enroll Now